Beijer-electronics iX Panel T60 EN Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Kontrolní panel Beijer-electronics iX Panel T60 EN. Beijer Electronics iX Panel T60 EN User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk

Shrnutí obsahu

Strany 1 - Service&MaintenanceManual

iXPanelT60Service&MaintenanceManualEnglishMAEN005,2010-05

Strany 2 - Foreword

Installation3Installation3.1 SpaceRequirements• Installation plate thickness: 1.5 - 7.5 mm (0.06 - 0.3 inch)• Space requirements when installing the o

Strany 3 - Contents

Installation2.Place the panel cut out where the operator panel is to be situated, draw alongthe outer sides of the holes and cut according to the mark

Strany 4

Installation4.Connect the cables in the specified order, according to the drawing and stepsbelow.Caution:• Ensurethattheoperatorpanelandthecontrollersy

Strany 5 - 1SafetyPrecautions

Installation3.2.1 ConnectionstotheControllerFor information about the cables to be used when connecting the operator panel tothe controller, please re

Strany 6 - 1.5 DismantlingandScrapping

Technical Data4TechnicalDataParameter iX Panel T60Frontpanel,WxHxD 202x152x6mmMountingdepth 57mm(157mmincludingclearance)Frontpanelseal IP66Rear panel

Strany 7 - 2Introduction

Chemical Resistance5 ChemicalResistance5.1 MetalCasingThe frame and casing material is powder-coated aluminum. This powder paintwithstands exposure to

Strany 8 - 2.4 DismantlingandScrapping

Chemical Resistance5.2 TouchScreenandOverlay5.2.1 AutotexF157/207Autotex F157 or F207 covers the overlay surrounding the touch screen.SolventR esistan

Strany 9 - 2.5 ContactandSupport

Chemical Resistance5.2.2 TouchScreenSurfaceThetouchscreensurfaceonthepanelwithstandsexposuretothefollowingsolvents without visible change:Solvents Tim

Strany 10 - 3Installation

Hardware Tests6 HardwareTestsBefore the operator panels are approved for market introduction, they are testedby independent authorities. The iX Panels

Strany 11 - 0.5 - 1.0 Nm

Hardware Replacement7 HardwareReplacementThis section contains instructions on how to replace operator panel hardware.Only components included in the

Strany 12 - Ethernet

ForewordService&MaintenancemanualforiXPanelT60ForewordThis manual contains detailed information about iX Panel T60, includingdescriptions of vario

Strany 13 - BeijerElectronics, MAEN005

Hardware ReplacementMODE Description1110 Self-test.xxx1 Hardreset(forcesthesystemtorese t).To ch ange mode switches, follow the steps below:1.Disconne

Strany 14 - 4TechnicalData

Hardware Replacement7.3 ReplacingtheRearCoverThe following is needed:• Anewrearcover,seeAvailable Spare Parts for iX Panel T60• AtorxT10screwdriverNot

Strany 15 - 5 ChemicalResistance

Hardware Replacement7.4 ReplacingtheDisplay/DisplayCableThe following is needed:• A new display including display frame, seeAvailable Spare Parts for

Strany 16 - 5.2 TouchScreenandOverlay

Hardware Replacement7.Insert the two screwdrivers between the display frame and the aluminumcasingillustratedbelow. Pressandbendgentlyonthedisplayfram

Strany 17 - 5.2.3 AutoflexEB

Hardware Replacement7.5 ReplacingtheCompleteFrontThe following is needed:• Anewfront,seeAvailable Spare P arts for iX Panel T60• AtorxT10screwdriverNo

Strany 18 - 6 HardwareTests

Hardware Replacement7.6 ReplacingtheBatteryThe following is needed:• Anewbattery,seeAvailable Spare Parts for iX Panel T60Note:MakesuretouseadequateES

Strany 19 - 7 HardwareReplacement

Hardware Replacement7.7 ReplacingtheBacklightIf the backlight of the iX Panel T60 is broken, the entire display must be replaced.To replace the displa

Strany 20 - 7.2 Cables

Hardware Replacement7.8 AvailableSparePartsforiXPanelT60Ordernumber Description601009280 COMPLETEFRONTIncludingfrontcover,touchoverlay,gasketsandlabel

Strany 21 - 7.3 ReplacingtheRearCover

Service Menu8ServiceMenuThe service menu for the operator panel can be accessed before a project isdownloaded, or by setting the mode switches in mode

Strany 22 - • AtorxT10screwdriver

Service Menu8.3.3 EraseProjectThe erase function will detect if the project is located in the panel memory or on amemory card. Pressing Erase Project

Strany 23 - 7.4.1 Self-testoftheDisplay

ContentsContents1 Safety Precautions ... 51.1 General ...

Strany 24 - 7.5 ReplacingtheCompleteFront

Hardware Self Test9 HardwareSelfTestThe self-test program can be used to test aspects of operator panel functionalityand the communication ports. To r

Strany 25 - 7.6 ReplacingtheBattery

Additional Installation Tips10 AdditionalInstallationTipsWhen experiencing communication problems in for example noisy environmentsor when operating c

Strany 26 - 7.7 ReplacingtheBacklight

Additional Installation Tips10.2 EthernetConnectioninthePanel123451-12-23-38-8RJ45RJ45RJ45RJ45RJ45RJ45RJ45RJ45Industrial EthernetOperator panelOperato

Strany 27 - Hardware Replacement

Additional Installation Tips10.3 ToAchieveBetterEMCProtection• Initially, use the original cabling from Beijer Electronics primarily.• Use shielded ca

Strany 28 - 8ServiceMenu

Additional Installation Tips10.4 AmbientTemperatureThe maximum ambient temperature for the operator panel is provided in thespecifications. The ambient

Strany 29 - 8.3.5 TouchCalibrate

Additional Installation Tips10.5 SafetyMost of the operator panels are fed with 24 V DC.412434Power supply230 V AC to 24 V DCPower supply230 V AC to 2

Strany 30 - 9 HardwareSelfTest

Additional Installation Tips10.6 GalvanicIsolationUSBUSBRS232RS422/485+24 V DC0 VFilterDC/DCgalvanic isolationVCC0 V (GND)DC/ACCFLEthernetInternal ele

Strany 31 - 10 AdditionalInstallationTips

Additional Installation Tips10.7 CableandBusTerminationRS485• Use shielded and twisted pair cable. The pair capacitance may not exceed 52.5pF/m and ar

Strany 32

Fault Tracing11 FaultTracingThis section includes different fault scenarios and steps to follow to trace the fault.TheiXPanelT60isnotworkingproperly,a

Strany 33 - Shielded cable Shielded cable

Fault TracingTheiXPanelT60isworking,butoneormorekeysarenotworking1.Check that the flex cables are correctly fitted.2.Replace the front according to the

Strany 34 - 10.4 AmbientTemperature

Contents9 Hardware SelfTest ... 3010 Additional Installation Tips ...

Strany 35 - 10.5 Safety

Software12 SoftwareThis chapter describes how to maintain and update the software in the iX Panels.The chapter includes a general description of the o

Strany 36 - 10.6 GalvanicIsolation

Software12.2 UpdateSoftwareWhen an update is available, an e-mail is sent to the distributors. The software isalso available on the manufacturer’s web

Strany 37 - Inside operator panel

SoftwareTransferImage1.Double-click on the executable Image Loader file to start the transfer program.2.Follow the instructions.The image transfer proc

Strany 38 - 11 FaultTracing

Environmental Aspects13 EnvironmentalAspectsThis chapter includes inform ation about the environmental impact of iX Panels.More information can be fou

Strany 39

Environmental Aspects13.3 RecyclingThe operator panels consist largely of aluminum. It is a great advantage in terms ofboth resources and the environm

Strany 40 - 12 Software

HEADOFFICE SUBSIDIARIESSWEDEN GERMANY USABeijerElectronicsProductsAB Elektronik-SystemeLauerGmbH&Co. KG BeijerElectronicsInc.Box426 Kelterstraße59

Strany 41 - 12.2 UpdateSoftware

Safety Precautions1SafetyPrecautionsBoth the installer and the owner and/or operator of the operator panel must readand understand this installation m

Strany 42 - TransferImage

Safety Precautions1.3 DuringUse• Keep th e operator panel clean.• Emergency stop and other safety functions may not be controlled from theoperator pan

Strany 43 - 13 EnvironmentalAspects

Introduction2IntroductionThis manual describes how to maintain the iX Panel T60.The functions available in iX Developer depend on which operator panel

Strany 44 - 13.3 Recycling

Introduction2.2 MaintenanceCarefully read the instructions before beginning maintenance on the operatorpanel.• Only qualified personnel should carry ou

Strany 45

Introduction2.5 ContactandSupportIf you want to report a fault or have a question about the operator panels, pleasecontact your local supplier or fill

Komentáře k této Příručce

Žádné komentáře