Beijer-electronics SCOM Protocol EN Uživatelský manuál stáhnout pdf (Strana 102)

Command Reference

102 Elektronik-Systeme Lauer, MAEN976

Example

Read the lower backlight level range limit configuration for the monitor at address

0.7 (group 0, address 7):

According to the data returned by the monitor at address 0.7 (group 0, address 7),

the lower backlight level range limit is 0 (0x00). This means, the user cannot adjust

the backlight level lower than the ECDIS backlight level, using the front panel key:

0 1 2 3 4 5 6 7...8 9

0x07 0x07

0x4C 0x41 0x55 0x02 0x0D 0x01 0x22 0xDC

0 1 2 3 4 5 6 7 8

0x06 0x07

0x4C 0x41 0x55 0x01 0x0F 0x00 0xFF

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 142 143

SCOM Protocol 1
Foreword 2
Contents 3
1 Interface Configuration 9
2 Ethernet Communication 10
Dynamic Addressing 11
Static Addressing 11
Sample Application 12
SCOM Message Basic Format 13
4 Monitor Addressing 15
Ti: Inter-message gap [s] 16
Delayed Response 17
Related information 18
6 Command Reference 19
6.1 BRT 20
6.2 MAN 22
6.3 VER 23
6.4 POT 24
6.5 MCC 26
6.6 MCC_BRIGHTNESS (0x81) 28
6.7 MCC_CONTRAST (0x82) 31
6.8 MCC_SCALINGMODE (0x8C) 34
Main Video Signal Source 37
6.10 MCC_GAMMAVALUE (0x9D) 40
Selection 42
6.13 MCC_COLOURTEMP (0xB3) 47
Maximum Lr for this Command 48
6.14 MCC_REDLEVEL (0xB4) 50
6.15 MCC_GREENLEVEL (0xB5) 53
6.16 MCC_BLUELEVEL (0xB6) 56
6.17 TYP 59
6.18 ETC 60
6.19 LAU 62
Firmware Version 64
Host Name 65
MAC (Ethernet) Address 67
Static IP Address 68
Subnet Mask 69
Gateway Address 70
DHCP Mode 71
(0x0109) 72
(0x010A) 73
(0x010B) 74
(0x010C) 75
(0x010D) 76
DIL Switch Mode 77
(0x010F) 78
(0x0110) 79
Baudrate 82
POT Mode 83
ECDIS Mode 84
(0x0115) 85
(0x0116) 86
(0x0117) 87
(0x0118) 89
(0x0119) 90
(0x011A) 91
(0x011B) 92
(0x011C) 93
(0x011D) 94
(0x011E) 95
(0x011F) 97
(0x0120) 98
(0x0122) 101
(0x0123) 103
0 1 2 3 4 5 6 7...8 9 104
0x07 0x07 104
0 1 2 3 4 5 6 7 8 104
(0x0125) 105
(0x0127) 106
ECDIS Mode Control 107
Command Reference 108
Example 108
Buzzer Control 109
Digital Output Control 111
6.60 LAU_CONTROL_ANALOGTOBRT 113
(0x0204) 113
0 1 2 3 4 5 6 7...9 10 114
(0x0205) 115
Digital Input Configuration 117
Current IP Address 119
Current Monitor Address 120
Current POT Mode 123
Current ECDIS Mode 124
Current Buzzer State 125
Current Backlight State 126
Current Analog Input Value 130
(0x030C) 132
(0x030E) 135
7 Sample Communication 137
Application 137
CiS-Nr.: 360.610.0280 143

Komentáře k této Příručce

Žádné komentáře

Beijer-electronics SCOM Protocol EN Uživatelský manuál Strana 102

Komentáře k této Příručce

Související produkty a manuály pro Monitory Beijer-electronics SCOM Protocol EN