Beijer-electronics CAN J1939 EN Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Beijer-electronics CAN J1939 EN. Beijer Electronics CAN J1939 EN User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 4
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Cable Connection
The pins for the CAN connection are used according to the description below.
Settings in the Configuration Tool
Double-click on the Peripherals folder in the Project Manager in the configuration
tool for the operator panel.
Right-click on Expansion Port and select Fieldbus. Then drag Controller 1 or
Controller 2 with the corresponding driver to the Fieldbus icon. To change the se-
lected driver, select Properties from the Project menu.
For further information, please see the information for the driver.
Pin Description
1Not used
2 Connection to CAN High
3 Connection to CAN Low
4Not used
5 Connection to CAN Shield
Note:
The last user on the CAN bus must be terminated with R120
Ω.
12345
Expansion Module for CAN J1939
Installation
MAEN962 2009-02
English
Zobrazit stránku 0
1 2 3 4

Shrnutí obsahu

Strany 1 - Installation

Cable ConnectionThe pins for the CAN connection are used according to the description below. Settings in the Configuration ToolDouble-click on the Per

Strany 2 - Space Requirements

Installation of Expansion Module for CAN J1939 The expansion module is used for the operator panel to communicate via CAN J1939. The correct driver mu

Strany 3

Installation of Expansion Module for CAN J1939 The expansion module is used for the operator panel to communicate via CAN J1939. The correct driver mu

Strany 4

Cable ConnectionThe pins for the CAN connection are used according to the description below. Settings in the Configuration ToolDouble-click on the Per

Komentáře k této Příručce

Žádné komentáře